The next step is to attach the hinges to the door,

[zihadhosenjm40]

The sizes of doors differ, and the size of the selected frame depends on them. It is necessary to remember about the gaps and not to make a mistake, so that you do not have to expand the opening in the wall later.

each of which should protrude into the room, and the distance from the top and bottom of the door leaf should be at least 20-25 cm. The hinge should protrude 2 mm beyond the edge of the door. After all installations, outline both hinges with a pencil and carefully select the outlined part of the door leaf with a chisel. Place the hinges in the prepared grooves, drill small holes with a drill and screw them in with screws.

Next, we assemble the door frame. There are two ways of assembling: at 45 degrees and at a right angle. The latter method is simpler, but the connection is less reliable.


The first method requires a circular saw morocco mobile database an angle set. If you don't have one, it's best to use the second method. The frame parts: two posts and a lintel (a horizontal beam in the upper part) are cut at a right angle using a hacksaw, and the lintel can be placed on top of the posts or between them. Having attached the door to the frame and having retreated 2.5 mm, we make a mark for the threshold, not forgetting about the gaps on the sides.


At this stage, we mark the places for the hinges and the lock, so that we can then select them with a chisel. We screw the box with screws, having previously drilled holes with a drill, screw on the plate for the lock and hinges (it is assumed that the hinges used are composite, with two parts - for the door leaf and for the box).