Other advantages of chamfering:

[zihadhosenjm40]

The processed edge of the laminated board is necessary to imitate the same covering, but from natural wood. Laminate is much cheaper than natural walnut or pine, and in this form it perfectly replaces them. A chamfer cut on both sides visually lengthens the room if the panels are laid along a long wall. Four-sided processing leads to a visual increase in area, the surface of such laminate becomes similar to expensive oak parquet.

The second most important use of chamfers is the colombia mobile database to hide small flaws and defects in the laid flooring. Even if the locks connect two boards tightly enough, over time the force of attraction weakens, and cracks appear.


conceal the appearance of such cracks, make them less noticeable;
to level out a small difference in height between two adjacent slats;
protect corners from chipping, especially under high mechanical loads.
Just remember that a chamfer is not a panacea. If the base for the laminate flooring was made carelessly, with unevenness and a noticeable difference in height, then the presence of grooves will not save you from the rapid loosening of the locks. Under constant mechanical load, they will move apart, leaving wide gaps between the floorboards that cannot be hidden.

Flaws
Many of the disadvantages of chamfered laminate flooring turn out to be far-fetched upon closer inspection and do not pose a serious danger when using the popular flooring material. There are various myths and prejudices among users that can be easily dispelled using practical advice.

Myth Reality
The presence of gaps between the panels complicates cleaning; dirt gets stuck and is difficult to remove with conventional means. With micro chamfering, the gap depth is only 1 mm, which prevents debris from getting into it. A vacuum cleaner or damp cloth can easily clean deeper grooves.