Table leg production is on the second level

[jarinislamfatema]

And in the first-level table opposite the "legs" component, the Quantity per unit value will be equal to 4. And if the calculation is made for the production of 10 tables, then the Planned-order release for the "table legs" component will be equal to 4*10 = 40. BOM (Product tree) BOM In order to use MRP tables in practice, it is necessary not only to understand where and what data to use, but also to understand the sources on the basis of which this data is formed. This is the so-called "Product Tree" or, as it is called in foreign literature, BOM (Bill of materials), which means "list of materials or product structure".

The Bill of Materials is most often presented as a table estonia whatsapp number data that displays a list of materials with the following additional values: Level (for MRP) Material article The quantity required to produce 1 unit of output. Price. BOM tables are needed to represent the finished product as a list of required materials, divided into production cycle levels. There are two options for presenting products in terms of materials: BOM. The tables can be very different, there is no single standard in either domestic or Western sources. Even in examples in Western textbooks you will find a wide variety of such tables.

Sometimes they are simple with a minimum of data, sometimes they are complex, nested one into another, even the lists of data on materials, except for the basic ones described above, differ. Product tree. The tree diagram also displays all the necessary materials, but with a clear distribution by levels. BOM table example BOM table example In some sense, BOM is similar to Specification. But Specification describes in maximum detail each of the semi-finished products, each component separately. And the BOM table is always a description of the product as a whole. And it is needed first of all to understand what the product consists of, and what needs to be purchased for its production.