From plastic and metal-plastic pipes

[zihadhosenjm40]

Foil and a rubber mat are spread on the bottom of the box, then the condenser is placed on them and secured. For this, you can use belts, clamps, or the fastener with which it was attached in the refrigerator. To create pressure in the system, it would not hurt to install a pump or aqua chamber above the tank.

How to make a solar collector with your own hands, having plastic pipes in your home arsenal? They are less effective as a heat accumulator, but are several times cheaper than copper and do not corrode like steel.

The pipes are laid out in a spiral in the box kazakhstan mobile database secured with clamps. They can be coated with black or selective paint for greater efficiency.

You can experiment with laying pipes. Since pipes do not bend well, they can be laid not only in a spiral, but also in a zigzag. Among the advantages, plastic pipes are easy and quick to solder.

From metal pipes
This assembly option is similar to the Stanilov collector. When assembling a solar collector from copper pipes with your own hands, a radiator is welded from the pipes and placed in a wooden box, lined with thermal insulation from the inside.

Copper pipes will be the most effective; aluminum pipes can also be used, but they are difficult to weld, but steel pipes are the best option.

Such a homemade collector should not be too big so that it is easy to assemble and install. The diameter of the pipes on the solar collectors for welding the radiator should be smaller than the pipes for the input and output of the coolant.

How to connect a solar collector to a tank (shower) by gravity
The weak point of summer solar collectors is the need to use a pump. This greatly increases the cost of the design or makes it completely unacceptable.