One of the most frequently asked questions is whether

Discuss my database trends and their role in business.
Post Reply
zihadhosenjm40
Posts: 520
Joined: Sat Dec 21, 2024 3:28 am

One of the most frequently asked questions is whether

Post by zihadhosenjm40 »

Next, we will review the options for covering surfaces such as old paint, plaster or a layer of old tiles.

it is possible to glue tiles on putty. Facing a putty or plastered base is quite possible if the base is properly prepared:

Check the quality of the putty adhesion. It is enough to knock on it and listen to the sound produced. If the sound is empty, then this indicates possible voids or a very thick layer of low-quality material. Such putty must be removed.
If the putty layer is sanded and has a smooth surface, it greece mobile database be sanded with coarse sandpaper or notched to ensure adhesion.
Before gluing tiles, the surface must be primed in 2-3 layers.
This also includes the question of whether it is possible to glue tiles on gypsum plaster. Before starting work, you also need to check the quality of the plaster.

It is important to remember that gypsum absorbs a lot of moisture and has lower adhesion rates than cement. It is necessary to carefully prime the surface to minimize the degree of absorption. Thin-layer glue is used for gypsum plaster or putty. Before gluing floor tiles to gypsum, it is recommended to additionally lay a layer of paint mesh and fix it with PVA glue.


Recently, a relatively new material, glass-magnesite fiber or SMF, has been used to level the surface. In this regard, many questions arise about how to glue tiles on SMF and whether this can be done? If you use SMF for tiling, it must be installed with the rough side facing outward, since this is the side to which the tiles must be glued. The material practically does not absorb moisture, the surface must be carefully treated with a primer.

If the tiles are laid on a wall, then a thin-layer adhesive with high adhesion should be used. If on the floor, then any universal cement-based composition can be used. In this article, we briefly considered how to properly glue tiles to different types of bases that are most often encountered when leveling a surface. In conclusion, we recommend watching a video about laying tiles.
Post Reply