Valve Allows You to Regulate the
Posted: Mon Feb 17, 2025 8:26 am
Features of mounting an aerator on corrugated sheets
To install an aerator on a roof covered with corrugated sheeting, a wooden box is usually used. The installation process looks like this:
After marking the location of the aerator installation, a cross-cut is made in the corrugated sheet.
The resulting triangular petals are bent downwards and nailed to the rafters and other wooden elements.
A box is knocked together from boards according to the dimensions of the opening. Then it is inserted into the opening and screwed to the elements of the rafter system with self-tapping screws.
The aerator-mushroom pipe is installed and fixed in chinese thailand data box, after which all the cracks are filled with sealant.
Aerators for ondulin roofing
Ondulin manufacturers produce all the elements necessary for both ventilation of the under-roof space and for organizing the exit to the roof of various ventilation ducts. Here is their list:
Aerators.
Insulated hood ventilation outlets. The exhaust ventilation ducts from the kitchen (the hood above the stove can also be connected here) and the bathroom are connected to such outlets. The pipe has a diameter of 125 mm and is equipped with a special coating inside, preventing the formation of grease and dirt. The outlet is equipped with a deflector on top, protecting the internal cavity from precipitation and improving traction.
The pipes for the ventilation outlet of bathrooms and kitchen hoods are painted in the main colors of ondulin
Uninsulated sewer ventilation outlets. The sewer riser fan pipes are connected to such outlets. Without communication with the atmosphere in the sewer, a salvo discharge of water will cause a decrease in pressure, which can lead to the breakdown of siphons with subsequent penetration of unpleasant odors into the room. The diameter of the sewer outlet is 110 mm.
Ventilation sewer outlets with insulation. Such outlets differ from the previous version by the presence of a shell made of polyurethane or another polymer (the thickness is 25 mm), which helps reduce heat loss and thereby minimizes the amount of condensation on the inner surface.
The ventilation outlet for the sewerage system can have a protective shell made of polymer material to reduce the amount of condensate formed.
To install an aerator on a roof covered with corrugated sheeting, a wooden box is usually used. The installation process looks like this:
After marking the location of the aerator installation, a cross-cut is made in the corrugated sheet.
The resulting triangular petals are bent downwards and nailed to the rafters and other wooden elements.
A box is knocked together from boards according to the dimensions of the opening. Then it is inserted into the opening and screwed to the elements of the rafter system with self-tapping screws.
The aerator-mushroom pipe is installed and fixed in chinese thailand data box, after which all the cracks are filled with sealant.
Aerators for ondulin roofing
Ondulin manufacturers produce all the elements necessary for both ventilation of the under-roof space and for organizing the exit to the roof of various ventilation ducts. Here is their list:
Aerators.
Insulated hood ventilation outlets. The exhaust ventilation ducts from the kitchen (the hood above the stove can also be connected here) and the bathroom are connected to such outlets. The pipe has a diameter of 125 mm and is equipped with a special coating inside, preventing the formation of grease and dirt. The outlet is equipped with a deflector on top, protecting the internal cavity from precipitation and improving traction.
The pipes for the ventilation outlet of bathrooms and kitchen hoods are painted in the main colors of ondulin
Uninsulated sewer ventilation outlets. The sewer riser fan pipes are connected to such outlets. Without communication with the atmosphere in the sewer, a salvo discharge of water will cause a decrease in pressure, which can lead to the breakdown of siphons with subsequent penetration of unpleasant odors into the room. The diameter of the sewer outlet is 110 mm.
Ventilation sewer outlets with insulation. Such outlets differ from the previous version by the presence of a shell made of polyurethane or another polymer (the thickness is 25 mm), which helps reduce heat loss and thereby minimizes the amount of condensation on the inner surface.
The ventilation outlet for the sewerage system can have a protective shell made of polymer material to reduce the amount of condensate formed.