What is difficult about equipping a home with a ventilation system?

zihadhosenjm40 · Post by **zihadhosenjm40** » Mon Feb 17, 2025 8:35 am

How to bring ventilation to the roof: it is important to ensure draft
Constant draft is an essential condition for normal ventilation operation. To create it in the manner prescribed by current regulations, it is necessary to take into account the following when designing the system:

Ventilation pipes must be purchased taking into account two main requirements: they must be moisture-resistant and not subject to corrosion. Therefore, polymer pipes are most suitable:

For normal well-being, any person needs an influx of fresh air, and chinese malaysia data due to a draft or an open door to the balcony. The main working engine of the natural ventilation system was and remains a correctly installed ventilation pipe. There are quite a lot of requirements for the arrangement of the ventilation pipe:

Important! Exhaust ducts responsible for the inflow of fresh air must not be directly combined indoors or on the roof with the ventilation pipe of the kitchen or sanitary premises.

At first glance, there is nothing threatening in such a combination, on the contrary, you can get rid of the palisade of ventilation risers on the roof and get by with one, the most powerful one. At the same time, it becomes possible to reduce the risk of violating the waterproofing of the ventilation pipe, which always accompanies the installation of a ventilation pipe on the roof of a private house

In practice, such a solution will lead to the exhaust air and smell wandering around the rooms in a completely unpredictable manner, and the only way to restore order in the system will be to install a powerful roof fan; internal low-power electric fans will no longer be enough.

Equipment to improve the performance of the ventilation system
The most popular equipment for increasing the performance of the ventilation system is a deflector. This is a nozzle that is attached to the highest point of the ventilation. It is usually mounted above the exhaust openings or on the ventilation pipes.