Read also: Soundproofing the floor in the apartment
Posted: Mon Feb 17, 2025 8:36 am
Two-lane.
This type of parquet board consists of two parts of one valuable wood species. By laying such wide planks on the floor, you can completely change the appearance of the room. Traditionally, this type of parquet board is used to create so-called palace floors.
Three-lane
Three-strip board consists of three segments formed by valuable wood species. Such models are used to make figured floor coverings. The width of a three-strip board is quite significant - 19-21 cm. This job seekers data of parquet board is most in demand by modern interior designers, since it can be used to create any style. Moreover, the main demand on the market is for three-strip parquet boards, and all other variations are brought in by special orders.
Four-strip parquet board.
This type of parquet board is made from waste, and therefore is the most budget-friendly. The width of the plates is small, which is why the pattern of the coating may be uneven. The resistance to temperature and moisture of the four-strip board is low.
Types of parquet boards based on wood species
Oak. Everyone knows that the distinctive characteristics of this species are high strength and durability. The density of oak is 700 kg/m³. It is also important to know about the high antibacterial properties of this wood species and that it is practically not subject to decay.
Ash. This wood has a wide range of colors (from orange to purple). It is quite difficult to process this wood, as it is characterized by increased hardness. The density of parquet from this species is 700 kg/m³. Ash parquet boards are perfect for rooms with high traffic.
Beech. This wood species reacts very quickly to the effects of temperature and moisture. The density is slightly lower than the previous ones - 650 kg / m³. If you have chosen a beech floor covering, it is worth keeping in mind that in rooms with parquet, it is necessary to especially carefully monitor the balance of moisture and air, ideally - to install a special split system for this. Also, special attention will require compliance with the installation technology, so that the planks do not warp in the future.
This type of parquet board consists of two parts of one valuable wood species. By laying such wide planks on the floor, you can completely change the appearance of the room. Traditionally, this type of parquet board is used to create so-called palace floors.
Three-lane
Three-strip board consists of three segments formed by valuable wood species. Such models are used to make figured floor coverings. The width of a three-strip board is quite significant - 19-21 cm. This job seekers data of parquet board is most in demand by modern interior designers, since it can be used to create any style. Moreover, the main demand on the market is for three-strip parquet boards, and all other variations are brought in by special orders.
Four-strip parquet board.
This type of parquet board is made from waste, and therefore is the most budget-friendly. The width of the plates is small, which is why the pattern of the coating may be uneven. The resistance to temperature and moisture of the four-strip board is low.
Types of parquet boards based on wood species
Oak. Everyone knows that the distinctive characteristics of this species are high strength and durability. The density of oak is 700 kg/m³. It is also important to know about the high antibacterial properties of this wood species and that it is practically not subject to decay.
Ash. This wood has a wide range of colors (from orange to purple). It is quite difficult to process this wood, as it is characterized by increased hardness. The density of parquet from this species is 700 kg/m³. Ash parquet boards are perfect for rooms with high traffic.
Beech. This wood species reacts very quickly to the effects of temperature and moisture. The density is slightly lower than the previous ones - 650 kg / m³. If you have chosen a beech floor covering, it is worth keeping in mind that in rooms with parquet, it is necessary to especially carefully monitor the balance of moisture and air, ideally - to install a special split system for this. Also, special attention will require compliance with the installation technology, so that the planks do not warp in the future.