The grill pan is installed on legs or stands;
Posted: Mon Feb 17, 2025 10:29 am
lay out with bricks;
weld classic sawhorses from a corner or profile pipe;
use a used sewing machine stand;
cut out semicircular seating surfaces in a vertically installed 50 l cylinder to fit the diameter of the brazier;
Place several metal car wheel rims on top of each other and weld them together.
In addition to the existing schemes of racks, legs and facebook data units, a home craftsman can use his own version.
Steel pipes of a suitable diameter are suitable for the chimney. The main nuances are that it is not recommended to cut the chimney into the hole from which the cylinder valve was unscrewed, it is better to install the pipe at the top point of the cylindrical structure, with the open lid of the barbecue the chimney becomes ineffective, it is used only during smoking delicacies.
Attention: The minimum height of the pipe to ensure traction is 1.5 m from the smoke generator firebox, into which the wet sawdust is placed.
Assembling a barbecue with a smokehouse, grill and barbecue - step-by-step video instructions
At the final stage, the smokehouse is assembled from the obtained blanks:
a smoke generator is welded to it from below, also resting on its own paws or legs;
A chimney is welded into the grill on top.
Unlike a brick barbecue oven or grill, the design is ready for immediate use, and the draft can be checked immediately.
Well, here are a couple of step-by-step video instructions:
Decorating a Universal Roaster
The resulting multifunctional barbecue can be equipped with additional functions and decorated with decorative elements:
weld classic sawhorses from a corner or profile pipe;
use a used sewing machine stand;
cut out semicircular seating surfaces in a vertically installed 50 l cylinder to fit the diameter of the brazier;
Place several metal car wheel rims on top of each other and weld them together.
In addition to the existing schemes of racks, legs and facebook data units, a home craftsman can use his own version.
Steel pipes of a suitable diameter are suitable for the chimney. The main nuances are that it is not recommended to cut the chimney into the hole from which the cylinder valve was unscrewed, it is better to install the pipe at the top point of the cylindrical structure, with the open lid of the barbecue the chimney becomes ineffective, it is used only during smoking delicacies.
Attention: The minimum height of the pipe to ensure traction is 1.5 m from the smoke generator firebox, into which the wet sawdust is placed.
Assembling a barbecue with a smokehouse, grill and barbecue - step-by-step video instructions
At the final stage, the smokehouse is assembled from the obtained blanks:
a smoke generator is welded to it from below, also resting on its own paws or legs;
A chimney is welded into the grill on top.
Unlike a brick barbecue oven or grill, the design is ready for immediate use, and the draft can be checked immediately.
Well, here are a couple of step-by-step video instructions:
Decorating a Universal Roaster
The resulting multifunctional barbecue can be equipped with additional functions and decorated with decorative elements: