The supporting pillars installed in the corners
Posted: Tue Feb 18, 2025 3:30 am
After installing the foundation, make the lower strapping. This is one of the most important links in the construction process when erecting a gazebo. Depending on the type of foundation, lay a grillage made of metal or timber with a cross-section of 20 x 20 on the installed supports.
The lower strapping is necessary for reliable fastening of the structure to the base. Fasten the lower crown to the foundation. The stronger the coupling, the longer the building will last. The strapping tier is necessary for all types of foundations, except for the construction of a gazebo on a beam laid on the ground. When using wooden materials, treat them with moisture-protective and antifungal compounds.
Pillars
of the gazebo are load-bearing supports that india car owner data the frame with the roof. To erect a wooden structure, install the posts perpendicular to the base at the corners of the strapping tier. Secure the columnar elements with corners, dowels, and pins.
Important!
During construction, treat each wooden element with special compounds that protect the wood from pests, fungus, and moisture. This will extend the life of the building.
To reduce construction costs and extend the service life of the wood, you can treat the lower trim with waste oil, fuel oil, or paint it with oil paint in several layers. After impregnating the wooden elements, wrap them in roofing felt. The waterproofing material will reliably protect the tier from precipitation, mold, and moisture.
Upper trim
For the stability of the structure and uniform distribution of the load on the longitudinal sides of the base, install 1-2 more columns, which are secured to the frame with hardware. Install crossbars on top of the support columns, which will serve as the base for the rafter system and as stiffeners for the frame.
For the posts installed in the middle of the longitudinal walls, use a wooden block or a log with a smaller cross-section. For the upper tier, use lumber with a cross-section of at least 10x10 cm. Securely fasten the crown at the corners and in places where it touches the support posts.
The lower strapping is necessary for reliable fastening of the structure to the base. Fasten the lower crown to the foundation. The stronger the coupling, the longer the building will last. The strapping tier is necessary for all types of foundations, except for the construction of a gazebo on a beam laid on the ground. When using wooden materials, treat them with moisture-protective and antifungal compounds.
Pillars
of the gazebo are load-bearing supports that india car owner data the frame with the roof. To erect a wooden structure, install the posts perpendicular to the base at the corners of the strapping tier. Secure the columnar elements with corners, dowels, and pins.
Important!
During construction, treat each wooden element with special compounds that protect the wood from pests, fungus, and moisture. This will extend the life of the building.
To reduce construction costs and extend the service life of the wood, you can treat the lower trim with waste oil, fuel oil, or paint it with oil paint in several layers. After impregnating the wooden elements, wrap them in roofing felt. The waterproofing material will reliably protect the tier from precipitation, mold, and moisture.
Upper trim
For the stability of the structure and uniform distribution of the load on the longitudinal sides of the base, install 1-2 more columns, which are secured to the frame with hardware. Install crossbars on top of the support columns, which will serve as the base for the rafter system and as stiffeners for the frame.
For the posts installed in the middle of the longitudinal walls, use a wooden block or a log with a smaller cross-section. For the upper tier, use lumber with a cross-section of at least 10x10 cm. Securely fasten the crown at the corners and in places where it touches the support posts.